Owner's Manual

22GB-AEDTK
Installing CPU
Before installing the processor, adhere to the following cautions:
• The processor will overheat without the heatsink and/or fan, resulting in permanent
irreparable damage.
• Never force the processor into the socket.
• Apply thermal compound evenly on the top of the processor before installing the
heat sink.
• Please make sure the CPU type is supported by the motherboard.
• If the CPU does not match the socket's Pin 1 and the socket's edge well, it will
cause improper installation. Please change the insert orientation.
Follow these instructions to install the CPU:
1. Raise the metal locking lever on the socket. Remove the plastic covering on the CPU
socket.
Insert the CPU with the correct orientation, it will only t in one direction.
2. Replace the metal cover.
3. Push the metal lever back into locked position.