User Manual

- 11 - Hardware Installation
USB  Chipset:
- 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 4-pin ATX 12V power connector
 6 x SATA 6Gb/s connectors
 1 x CPU fan header
 1 x system fan header
 1 x front panel header
 1 x front panel audio header
 1 x USB 3.0/2.0 header
 1 x USB 2.0/1.1 header
 1 x serial port header
 1 x S/PDIF Out header
 1 x Clear CMOS jumper
 1 x chassis intrusion header
Back Panel
Connectors
 1 x PS/2 keyboard/mouse port
 2 x HDMI ports
 2 x SMA antenna connectors (2T2R)jk
 1 x DVI-I port
 4 x USB 3.0/2.0 ports
 2 x USB 2.0/1.1 ports
 2 x RJ-45 ports
 1 x optical S/PDIF Out connector
 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Line Out, Mic In)
I/O Controller  iTE
®
I/O Controller Chip
Hardware
Monitor
 System voltage detection
 CPU/System temperature detection
 CPU/System fan speed detection
 CPU/System fan speed control
* Whether the fan speed control function is supported will depend on the cooler you
install.
BIOS  2 x 64 Mbit ash
 Use of licensed AMI UEFI BIOS
 Support for DualBIOS
™
 PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
j Only for GA-Z97N-WIFI.
k Only for GA-H97N-WIFI.