User`s manual

Appendix- 93 -
English
Step 4:
After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system
and then press Next to continue the OS installation (Figure 11).
Figure 10
Figure 11
Step 3:
When a screen as shown in Figure 10 appears, select Intel(R) ICH8R/ICH9R SATA RAID Controller
(Note)
and press Next.
(Note) The item displayed in Figure 10 will be shown as Intel(R) ICH9 SATA AHCI Controller
when the SATA controllers are set to AHCI mode.