User`s manual
Table Of Contents
- GA-G41MT-S2 Motherboard Layout
- Chapter 1 Hardware Installation
- Chapter 2 BIOS Setup
- 2-1 Startup Screen
- 2-2 The Main Menu
- 2-3 MB Intelligent Tweaker(M.I.T.)
- 2-4 Standard CMOS Features
- 2-5 Advanced BIOS Features
- 2-6 Advanced Chipset Features
- 2-7 Integrated Peripherals
- 2-8 Power Management Setup
- 2-9 PnP/PCI Configurations
- 2-10 PC Health Status
- 2-11 Load Fail-Safe Defaults
- 2-12 Load Optimized Defaults
- 2-13 Set Supervisor/User Password
- 2-14 Save & Exit Setup
- 2-15 Exit Without Saving
- Chapter 3 Drivers Installation
- Regulatory Statements
- 25 - BIOS Setup
DrivingStrengthProle
Options are: Auto (default).
Data Driving Pull-Up Level
Options are: Auto (default), +8~-7.
Cmd Driving Pull-Up Level
Options are: Auto (default), +8~-7.
Ctrl Driving Pull-Up Level
Options are: Auto (default), +8~-7.
Clk Driving Pull-Up Level
Options are: Auto (default), +8~-7.
Data Driving Pull-Down Lev
Options are: Auto (default), +8~-7.
Cmd Driving Pull-Down Lev
Options are: Auto (default), +8~-7.
Ctrl Driving Pull-Down Lev
Options are: Auto (default), +8~-7.
Clk Driving Pull-Down Lev
Options are: Auto (default), +8~-7.
********
Mother Board Voltage Control
********
>>> CPU
CPU Vcore
The default is Auto.
CPU Termination
The default is Auto.
>>> DRAM
DRAM Voltage
The default is Auto.