User`s manual

- 41 -

BIOS Setup

` PC Health Status

& Reset Case Open Status

Disabled Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwillshow

"No" at next boot.

& Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/Dram Voltage/+3.3V/+5V/+12V

Displays the current system voltages.

& CPU/System Temperature

Displays current CPU/system temperature.

& CPU/System Fan Speed

Displays current CPU/system fan speed.

& CPU Fan Speed Control

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the CPU temperature. You can adjust

thefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed under the Slope PWM item.

Disabled Allows the fan to run at full speeds.

& Slope PWM

 AllowsyoutocontroltheCPUfanspeed.ThisitemiscongurableonlywhenCPU Fan Speed Control is

set to Manual. Options are: 0.75 PWM value /

C ~ 2.50 PWM value /