User`s manual

GA-EG41M-S2H/S2 Motherboard - 50 -

2-6 Advanced Chipset Features

Advanced Chipset Features

Onboard VGA [Enable If No Ext PEG]

Init Display First [PCI]

PAVP Mode [PAVP Lite Mode]

PAVP Lite Mode [32MB]

x Paranoid PAVP Mode (32+96)128MB

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help

Menu Level

Onboard VGA

Enables or disables the onboard VGA function.

Enable If No Ext PEG

Activates the onboard VGA only if no PCI Express VGA card is installed. (Default)

Always Enable

Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to

set up a dual view configuration, set this item to Always Enable.

Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express

graphics card or the onboard VGA.

PCI Sets the PCI graphics card as the first display. (Default)

Onboard Sets the onboard VGA as the first display.

PEG Sets the PCI Express graphics card as the first display.

PAVP Mode

Enables or disables PAVP mode. Enable this function if you wish to playback HDCP contents.

PAVP mode can support increased content protection and robustness requirements for premium

content playback (e.g. Blu-ray disc).

Disabled Disables this function.

PAVP Lite Mode Specifies the buffer memory size for the encryption of compressed video.

(Default)

Paranoid PAVP Reserves 96 MB of system memory during boot. This memory is not

seen by the operating system and not available to any user application.

Aero (DWM) in Windows Vista will always be turned off in this mode.