User Manual

Pin No. Denition
1 12V
2 G
3 R
4 B
DEBUG PORT
G.QBOFM
1
18) LED_C1 (CPU Cooler LED Strip/RGB LED Strip Extension Cable Header)
The header can be used to connect a CPU cooler LED strip or a standard 5050 RGB LED strip (12V/G/R/B),
with maximum power rating of 2A (12V) and maximum length of 2m.
Connecting the CPU cooler LED strip:
Connect the connector of the CPU cooler LED strip (marked with an arrow) to Pin 1 (12V) of this header.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
For how to turn on/off the lights of the RGB (RGBW) LED strip, refer to the instructions on in
Chapter 2, "BIOS Setup."
12V
1
+12V
Black wire
12V of the
LED strip
Connecting the standard LED strip:
Connect one end of the RGB (RGBW) LED strip extension cable to the
header and the other end to your RGB (RGBW) LED strip. The black
wire (marked with a triangle on the plug) of the extension cable must be
connected to Pin 1 (12V) of this header. The 12V pin (marked with an
arrow) on the other end of the extension cable must be lined up with the
12V of the LED strip. Be careful with the connection orientation of the
LED strip; incorrect connection may lead to the damage of the LED strip.
Pin No. Denition
1 12V
2 G
3 R
4 B
5 W
F_USB30
F_U
B_ 
F_  F_ 

_
B
BS_
B
SB_
B
_S

S_
_
B
_U
_
B


 
S  
 
123
 
123
 
123
 
123
1
1
1
1
BSS
S
_S 
SSU
 
1 2 3  
 S3
BSSS

U
 __ 3
F_USB3F
S  _
S  _
S  _
SF


B_
B_
F
_0
S
S
_0F
_F
_
_
__B


U
S  _S
_
USB0_B
B_
F_USB3


_
1
17) LED_C (RGB (RGBW) LED Strip Extension Cable Header)
The header can be used to connect a standard 5050 RGB (RGBW) LED strip (12V/G/R/B/W), with maximum
power rating of 2A (12V) and maximum length of 2m.
Connect one end of the RGB (RGBW) LED strip extension cable to the
header and the other end to your RGB (RGBW) LED strip. The black
wire (marked with a triangle on the plug) of the extension cable must be
connected to Pin 1 (12V) of this header. The 12V pin (marked with an
arrow) on the other end of the extension cable must be lined up with the
12V of the LED strip. Be careful with the connection orientation of the
LED strip; incorrect connection may lead to the damage of the LED strip.
12V
1
Black wire
12V of the
LED strip
- 20 -