User`s manual

- 31 -
 OnChipSATAPortasESP
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
OnChip SATA Port as ESP
 Port0asESP    [Disabled]
 Port1asESP    [Disabled]
 Port2asESP    [Disabled]
 Port3asESP    [Disabled]

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

Port0 as ESP/Port1 as ESP/Port2 as ESP/Port3 as ESP
This option is congurable only when OnChipSATAType is set to AHCI. Enabled will speed up the hot
plug detection of the connected SATA device. (Default: Disabled)
 SMARTLAN(LANCableDiagnosticFunction)
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
SMART LAN
Start detecting at Port.....
Part1-2 Status = Open / Length = 0m
Part3-6 Status = Open / Length = 0m
Part4-5 Status = Open / Length = 0m
Part7-8 Status = Open / Length = 0m

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN
cable. This feature will detect cabling issue and report the approximate distance to the fault or short.
 OnChipSATAController
Enables or disables the integrated SATA controllers. (Default: Enabled)
 OnChipSATAType
Congures the operating mode of the SATA connectors.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.
AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
 OnboardLANFunction
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
 OnboardLANBootROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)