User`s manual

- 26 -
Minimum RAS Active Time
Options are: Auto (default), 15T~36T.
TwTr Command Delay
Options are: Auto (default), 4T~8T.
Trfc0 for DIMM2
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc1 for DIMM1
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Write Recovery Time
Options are: Auto (default), 5T~8T, 10T~16T.
Precharge Time
Options are: Auto (default), 4T~8T.
Row Cycle Time
Options are: Auto (default), 20T~54T.
RAS to RAS Delay
Options are: Auto (default), 4T~8T.
 FourBankActivateWindow
Options are: Auto (default), 16T~40T.
**
DCTs Drive Strength
**
 ProcOdt(ohms)
Options are: Auto (default), 240, 120, 80, 60.
DQS Drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Data Drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
MEMCLK Drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Addr/Cmd Drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
 CS/ODTDriveStrength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CKE Drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
**
DCTs Addr/Cmd Timing
**
Addr/Cmd Setup Time
Options are: Auto (default), 1/2T, 1T.
 Addr/CmdFineDelay
Options are: Auto (default)
, 0/64~31/64.
 CS/ODTSetupTime
Options are: Auto (default), 1/2T, 1T.
 CS/ODTFineDelay
Options are: Auto (default)
, 0/64~31/64.