User`s manual

- 25 -
DRAMConguration
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
DRAMConguration
 DDR3TimingItems  [Auto] SPD Auto
x 1T/2T Command Timing Auto -- --
x CAS# latency Auto 9T 9T
x RAS to CAS R/W Delay Auto 9T 9T
x Row Precharge Time Auto 9T 9T
x Minimum RAS Active Time Auto 24T 24T
x TwTr Command Delay Auto 5T 5T
x Trfc0 for DIMM2 Auto 110ns 110ns
x Trfc1 for DIMM1 Auto -- --
x Write Recovery Time Auto 10T 10T
x Precharge Time Auto 5T 5T
x Row Cycle Time Auto 33T 33T
x RAS to RAS Delay Auto 4T 4T
x Four Bank Activate Window Auto
**
DCTs Drive Strength
**
DCT0 DCT1
 ProcOdt(ohms)  [Auto] 60 [Auto] 60
 DQSDriveStrength [Auto] 1.0x [Auto] 1.0x
 DataDriveStrength [Auto] 1.0x [Auto] 1.0x
 MEMCLKDriveStrength [Auto] 1.25x [Auto] 1.25x

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
DRAMConguration

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

 Addr/CmdDriveStrength [Auto] 1.5x [Auto] 1.5x
 CS/ODTDriveStrength [Auto] 1.5x [Auto] 1.5x
 CKEDriveStrength [Auto] 1.5x [Auto] 1.5x
**
DCTs Addr/Cmd Timing
**
DCT0 DCT1
 Addr/CmdSetupTime [Auto] 1T [Auto] 1/2T
 Addr/CmdFineDelay [Auto] 22/64 [Auto] 0/64
 CS/ODTSetupTime [Auto] 1/2T [Auto] 1/2T
 CS/ODTFineDelay [Auto] 0/64 [Auto] 0/64
 CKESetupTime [Auto] 1/2T [Auto] 1/2T
 CKEFineDelay  [Auto] 0/64 [Auto] 0/64
 BankInterleaving  [Enabled]
DDR3 Timing Items
Manual allows all DDR3 Timing items below to be congurable.
Options are: Auto (default), Manual.
1T/2T Command Timing
Options are: Auto (default), 1T, 2T.
CAS# latency
Options are: Auto (default), 5T~14T.
RAS to CAS R/W Delay
Options are: Auto (default), 5T~14T.
Row Precharge Time
Options are: Auto (default), 5T~14T.