User`s manual

- 11 - Hardware Installation
USB Chipset: 
- Up to 6 USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available
through the internal USB header)
- Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available
through the internal USB header)
Internal
Connectors
1 x 24-pin ATX main power connector 
1 x 4-pin ATX 12V power connector 
6 x SATA 6Gb/s connectors 
1 x APU fan header 
1 x system fan header 
1 x front panel header 
1 x front panel audio header 
1 x S/PDIF Out header 
1 x USB 2.0/1.1 header 
1 x USB 3.0/2.0 header 
1 x serial port header 
1 x Trusted Platform Module (TPM) header 
1 x clearing CMOS jumper 
Back Panel
Connectors
1 x PS/2 keyboard/mouse port 
1 x D-Sub port 
1 x DVI-D port 
1 x HDMI port 
1 x optical S/PDIF Out connector 
4 x USB 2.0/1.1 ports 
2 x USB 3.0/2.0 ports 
1 x RJ-45 port 
3 x audio jacks (Line In/Line Out/Microphone) 
I/O Controller iTE IT8720 chip 
Hardware
Monitor
System voltage detection 
APU/System temperature detection 
APU/System fan speed detection 
APU overheating warning 
APU/System fan fail warning 
APU/System fan speed control 
* Whether the APU/system fan speed control function is supported will depend on the
APU/system cooler you install.