Technology Intel Pentium 4 Socket 478 Processor Motherboard User Manual

GA-8GEM800 主機板 - 62 -
繁
體
中
文
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
} Standard CMOS Features
} Advanced BIOS Features
} Integrated Peripherals
} Power Management Setup
} PnP/PCI Configurations
} PC Health Status
} MB Intelligent Tweaker(M.I.T.)
ESC: Quit F3: Change Language
F8: Dual BIOS/Q-Flash F10: Save & Exit Setup
Time, Date, Hard Disk Type...
6. 系統開機之後，按Del鍵進入BIOS選單並移動光棒到Load Fail-Safe Defaults選項且按Enter
來載入BIOS預設值。在BIOS更新之後，系統在正常情況下會重新去偵測所有週邊裝置；因
此，我們建議您在更新完BIOS之後，要重新載入BIOS預設值。
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Load Fail-Safe Defaults (Y/N)? Y
請按Y鍵載入預設值
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
} Standard CMOS Features
} Advanced BIOS Features
} Integrated Peripherals
} Power Management Setup
} PnP/PCI Configurations
} PC Health Status
} MB Intelligent Tweaker(M.I.T.)
ESC: Quit F3: Change Language
F8: Dual BIOS/Q-Flash F10: Save & Exit Setup
Time, Date, Hard Disk Type...
7. 請選擇Save & Exit Setup儲存設定到CMOS並離開BIOS選單，離開BIOS選單之後，系統將
會重新開機。整個更新程序即完成。
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Save to CMOS and EXIT (Y/N)? Y
請按Y鍵儲存設定並且離開
第二部份：在單 BIOS主機板上使用Q-Flash
TM
更新BIOS
這部分將指導您如何使用Q-Flash更新單顆BIOS主機板的 BIOS。
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
} Standard CMOS Features
} Advanced BIOS Features
} Integrated Peripherals
} Power Management Setup
} PnP/PCI Configurations
} PC Health Status
} MB Intelligent Tweaker(M.I.T.)
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: Quit F3: Change Language
F8: Q-Flash F10: Save & Exit Setup
Time, Date, Hard Disk Type...