Computer Accessories User Manual

- 42 -GA-7VA-C Motherboard
English
F PCI/AGP Frequency (MHz)
8The values depend on CPU Host Frequency(Mhz) .
F DRAM Clock (MHz)
8Please set DRAM Clock according to your requirement.
If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to "100-DDR200".
If you use DDR266 DRAM module, please set “DRAM Clock(MHz)" to "133-DDR266".
If you use DDR333 DRAM module, please set “DRAM Clock(MHz)" to "166-DDR333".
If you use DDR400 DRAM module, please set “DRAM Clock(MHz)" to "200-DDR400".
Incorrect using it may cause your system broken. For power End-User use only!
8Auto Set Memory frequency by DRAM SPD data. (Default value)
F CPU OverVoltage Control
Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this feature.
8Auto Supply voltage as CPU reguired. (Default value)
8+5% / +7.5% / +10% Increase voltage range as user selected.
F AGP OverVoltage Control
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this
feature.
8Auto Supply voltage as AGP Card reguired. (Default value)
8+0.1V~+.03V Set AGP voltage from 1.6V~1.8V.
F DIMM OverVoltage Control
Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when enable this
feature.
8Auto Supply voltage as DRAM module reguired. (Default value)
8+0.1V~+.03V Set DIMM voltage from 2.6V~2.8V.