User manual

- 8 -
 3URGXFW6SHFLÀFDWLRQV
CPU  AM3+ Socket:
- AMD AM3+ processor
- AMD AM3 Phenom
™
II processor/ AMD Athlon
™
II processor
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport
Bus

4400 MT/s
Chipset
 North Bridge: AMD 760G
 South Bridge: AMD SB710
Memory  4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of
physical memory is installed, the actual memory size displayed will be less than the
size of the physical memory installed.
 Dual channel memory architecture
 Support for DDR3 1333+ (O.C.)/1066 MHz memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard
Graphics
 North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200
* The DVI-D port does not support D-Sub connection by adapter.
- 1 x HDMI port, supporting a maximum resolution of 1920x1200
* Simultaneous output for DVI-D and HDMI is not supported.
Audio  Realtek ALC887 codec
 +LJK'H¿QLWLRQ$XGLR
 2/4/5.1/7.1-channel
 7RFRQ¿JXUHFKDQQHODXGLR\RXKDYHWRXVHDQ+'IURQWSDQHODXGLRPRGXOH
and enable the multi-channel audio feature through the audio driver.
 Support for S/PDIF Out
LAN  1 x Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots  1 x PCI Express x16 slot, running at x16
 1 x PCI Express x1 slot
(All PCI Express slots conform to PCI Express 2.0 standard.)
 1 x PCI slot
Storage Interface  South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33
- 6 x SATA 3Gb/s connectors
- Support for RAID 0, RAID 1, RAID 10, and JBOD
USB  South Bridge:
- 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the
internal USB headers)
 2 x Etron EJ168 chips:
- 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the
internal USB header)