User manual
- 17 -
Pin No. 'H¿QLWLRQ
1GND
2TXP
3TXN
4GND
5RXN
6RXP
7GND
7
7
1
1
7) SATA2 0/1/2/3/4/5 (SATA 3Gb/s Connectors, Controlled by AMD SB710 South Bridge)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.
Each SATA connector supports a single SATA device. The AMD SB710 controller supports RAID 0, RAID 1,
5$,'DQG-%2'5HIHUWR&KDSWHU&RQ¿JXULQJ6$7$+DUG'ULYHVIRULQVWUXFWLRQVRQFRQ¿JXULQJ
a RAID array.
6) IDE (IDE Connector)
The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching
the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices, remember
to set the jumpers and the cabling according to the role of the IDE devices (for example, master or slave).
)RULQIRUPDWLRQDERXWFRQ¿JXULQJPDVWHUVODYHVHWWLQJVIRUWKH,'(GHYLFHVUHDGWKHLQVWUXFWLRQVIURPWKH
device manufacturers.)
SATA2
5
4
SATA2
23
01
7
1
$5$,'RU5$,'FRQ¿JXUDWLRQUHTXLUHVDWOHDVWWZRKDUGGULYHV,IPRUHWKDQWZRKDUGGULYHV
are to be used, the total number of hard drives must be an even number.
$5$,'FRQ¿JXUDWLRQUHTXLUHVIRXUKDUGGULYHV
1
39
2
40