Datasheet

6VTXE(-A) Motherboard
47
• IDE2 Conductor Cable
Auto Will be automatically detected by BIOS (Default Value).
ATA66/100 Set IDE2 Conductor Cable to ATA66/100 (Please make sure your
IDE device and cable is compatible with ATA66/100)
ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE
device and cable is compatible with ATA33).
• On Board FDC
Auto Set On Board FDC is Auto (Default Value).
Disabled Disabled On Board FDC
Enabled Enabled On Board FDC
• Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address (Default Value).
3F8/COM1 Enable onboard Serial port 1 and address is 3F8.
2F8/COM2 Enable onboard Serial port 1 and address is 2F8.
3E8/COM3 Enable onboard Serial port 1 and address is 3E8.
2E8/COM4 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
• Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address (Default Value).
3F8/COM1 Enable onboard Serial port 2 and address is 3F8.
2F8/COM2 Enable onboard Serial port 2 and address is 2F8.
3E8/COM3 Enable onboard Serial port 2 and address is 3E8.
2E8/COM4 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
• Serial Port 2 Mode
ASKIR Set onboard I/O chip Serial Port 2 to ASKIR Mode.
IrDA Set onboard I/O chip Serial Port 2 to IrDA Mode.
Normal Set onboard I/O chip Serial Port 2 to Normal Mode. (Default Value)
• Duplex Mode
Half Duplex
IR Function Duplex Half.
N/A
Disabled this function. (Default Value)
Full Duplex
IR Function Duplex Full.