Intel® Pentium® 4 LGA775 / mPGA478 / AMD AM2 (940) / K8(939/754) Installation Guide GH-PDU22-SC REV.
English Table of Content Checklist...............................................................................................................3 Specification.........................................................................................................4 Feature................................................................................................................4 Warranty Item.......................................................................................................
English Checklist (1)GH-PDU22-SC Cooler (2)LGA775 RM (3) P4 clips ( mPGA478 / LGA 7 75 ) (4) AM2 / K8 clip (5) Heat sink paste (6) Screw (7) Fan Speed Control Cable (8)GH-PDU22-SC user's manual -3- GH-PDU22-SC
English Specification Fan Dimension : 110x110 x 25mm y Heat Sink Dimension : 110x110 x 109mm y Heatpipe Number : 3 y Fan Speed : 2,450 rpm (default) / 2,000 rpm (low speed) Rated Voltage : 12V y Noise :23.1 dBA at 2,000 rpm(with fan speed cable) y 27.5 dBA at 2,450 rpm (default) y y Bearing Type: EVR Sleeve y y y y y y y Base Maerial : Copper w/ Ni coating Fin Material : Aluminum fin Rated Current : 0.13Amp (2,000rpm) ~ 0.18Amp(2,450rpm) Airflow : 41~48.
English Precautions The cooler fan speed levels provided are for reference use only. Please refer to the motherboard BIOS to verify actual fan speed levels. Before use, please remove the bottom protective layer of the cooler. Please make sure the computer is turned off and its power disconnected prior to installation. Warranty Item Incorrect method of operation or use of product not for intended use Operational use beyond the advised standards (eg.
English Installation Instructions for P4 LGA775RM & Cooler Side A ARM Side B CAM Figure 1 Plastic Washers Figure3- 1 GH-PDU22-SC Figure 2 Figure3-2 To install GH-PDU22-SC on LGA775 motherboard needs both LGA775 RM & P4 clips. Please add an adequate layer of heat sink paste on the surface of the CPU. Figure 1 Place the LGA775RM onto the LGA775 motherboard so that side A is parallel with ARM and side B is parallel with CAM.
English Installation Instructions for Intel® Pentium® 4 mPGA478 Clips Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU(Figure1-1). Figure 1-2 showing the correct installation of the cooler atop the CPU. Figure 1-1 C Figure 1-2 B A Figure 2 Figure 2 Clip introduction-Part A: Secured to the retention mechanism hook. Part B: Tightly contact the cooler bracket. Part C: Secured to the retention mechanism hook.
English Installation Instructions for AMD AM2 (940) / K8 (939 / 754) Clip Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU. Figure 1-1 Figure 1-2 Figure 2 Figure showing the correct installation of the cooler atop the CPU. Figure 2 Figure 3 Figure 4-1 GH-PDU22-SC Figure 4-2 Figure 3 Align the three insert spaces of the clip with the three juts on the CPU socket and then push firmly downwards to hold the clip in space.
English Installation of the Fan Speed Control Cable Figure 1 Connect the 3-pin cooler power connector to the white Figure 1 Figure 2 connector of the fan speed control cable. Figure 2 The figure on the left shows the completed connection. Figure 3 Connect the other side of the cable to the CPU fan connector located on the motherboard. The original fan speed of 2,450 Figure 3 rpm will then drop down to 2,000 rpm.
English GH-PDU22-SC - 10 -
Intel® Pentium® 4 LGA775 / mPGA478 / AMD AM2 (940) / K8 (939 / 754) GH-PDU22-SC
.......................................................................................................13 .......................................................................................................14 .......................................................................................................14 .......................................................................................................15 ........................................................................................
(1) GH-PDU22-SC (2) LGA775 (3) P4 ( mPGA478 / LGA775) (4) AM2 / K8 (5) (6) (7) (8) GH-PDU22-SC - 13 - GH-PDU22-SC
y y y y y y y : 110 x 110 x 25 mm : 110 x 110 x 109 mm :3 : 2,450 rpm( ; ) 2,000rpm ( : 12V : 2,000 rpm , 23.1 dBA ( ) 2,450 rpm , 27.5 dBA ( : EVR Sleeve y G-Power Lite y y y y Intel P4 LGA775 ) ) y y y y y y y Intel P4 478 CPU AMD K8 MOSFET y GH-PDU22-SC : : Aluminum fin : (2,000RPM) ~ 0.18 (2,450RPM) 0.13 : 41~ 48.
B I O S - 15 - GH-PDU22-SC
P4 LGA775 GH-PDU22-SC LGA775 & P4 LGA775 A B CPU 1 LGA775 A 1 LGA775 LGA775 B LGA775 ( 1) 2 ( 2 2) 3 P4 LGA775 3-pin ( 3-1 GH-PDU22-SC 3-2 P4 mPGA478 - 16 - ( 3-1) CPU fan 3-2) Intel ® Pentium ®4
Intel® Pentium® 4 mPGA478 1 CPU CPU 1-1 ( ( 1-1) 1-2) 1-2 C 2 B A B C A 2 : : : 3 (A B C ) C 3-2 3-1 4 3-pin CPU fan 4 - 17 - GH-PDU22-SC
AMD AM2 (940) / K8 (939 / 754) 1 CPU ( 1-1 1-2) 1-2 2 CPU 2 3 CPU AM2 3 4 CPU 3-pin CPU fan 4-1 GH-PDU22-SC 4-2 - 18 -
1 3-pin 1 2 2 3 CPU fan 3 2,450 - 19 - 2,000 GH-PDU22-SC
GH-PDU22-SC - 20 -
- 21 - GH-PDU22-SC
GH-PDU22-SC - 22 -
