User Manual
Table Of Contents
- BIOS Update Utilities
- 1-1 Updating the BIOS with the Q-Flash Utility
- 1-2 Updating the BIOS with the @BIOS Utility
- 1-3 Using Q-Flash Plus
- APP Center
- 2-1 3D OSD
- 2-2 AutoGreen
- 2-3 Cloud Station
- 2-4 EasyTune
- 2-5 Fast Boot
- 2-6 Game Boost
- 2-7 Platform Power Management
- 2-8 RGB Fusion
- 2-9 Smart TimeLock
- 2-10 Smart Keyboard
- 2-11 Smart Backup
- 2-12 Smart HUD
- 2-13 System Information Viewer
- 2-14 USB Blocker
- 2-15 USB DAC-UP 2
- 2-16 V-Tuner
- 3 -
Select Q-Flash to access Q-Flash
B. Updating the BIOS
In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the BIOS,
choose the location where the BIOS le is saved. The following procedure assumes that you have saved the
BIOS le to a USB ash drive.
Step 1:
1. Insert the USB ash drive containing the BIOS le into the computer. In the main screen of Q-Flash, select
Update BIOS.
• The Save BIOS option allows you to save the current BIOS le.
• Q-Flash only supports USB ash drive or hard drives using FAT32/16/12 le system.
• If the BIOS update le is saved to a hard drive in RAID/AHCI mode or a hard drive attached
to an independent SATA controller, use the <End> key during the POST to access Q-Flash.
2. Select the BIOS update le.
Make sure the BIOS update le matches your motherboard model.