Motherboard GA-M55SLI-S4 Instruction Manual

- 26 -
English
GA-M55SLI-S4 Motherboard
9) SATAII0_1 / SATAII2_3 (SATA 3Gb/s Connectors, Controlled by nForce4 SLI)
SATA 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the Serial
ATA controller and install the proper driver in order to work properly.
Pin No. Definition
1 GND
2TXP
3 TXN
4 GND
5RXN
6 RXP
7 GND
7
1
7
1
SATAII 2
SATAII 3
SATAII 2_3
SATAII 0_1
7
17
1
SATAII 0
SATAII 1
10) F_AUDIO (Front Audio Panel Connector)
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper.
In order to utilize the front audio header, your chassis must have front audio connector. Also please
make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find
out if the chassis you are buying support front audio connector, please contact your dealer. Please note,
you can have the alternative of using front audio connector or of using rear audio connector to play
sound.
12
910
Pin No. Definition
1 MIC
2 GND
3 MIC_BIAS
4 Power
5 Front Audio (R)
6 Rear Audio (R)/ Return R
7NC
8 No Pin
9 Front Audio (L)
10 Rear Audio (L)/ Return L