Technology Processor Motherboard Product Manual

BIOS Setup- 43 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
HT Frequency ratio
Set HT Frequency ratio to 1x, 1.5x, 2x, 2.5x, 3x, 4x, or 5x. (Default: Auto)
CPU Frequency
200 ~ 456 Set CPU frequency from 200Mhz to 456Mhz.
Incorrect using these features may cause your system broken. For power end-user use only.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
MB Intelligent Tweaker(M.I.T.)
HT Frequency ratio [Auto]
CPU Frequency [200]
K8 CPU Clock Ratio [Auto]
Current DDR speed 400
DDR Clock/ Timing Mode [Auto]
x CPU/DDR clock Ratio 2 / 2
DDR Speed 400
x DDR Timing Auto
x CAS# latency (Tcl) 3
x Min RAS# active time (Tras) 8T
x RAS# to CAS# delay (Trcd) 3T
x Row precharge Time (Trp) 3T
x Row to Row delay (Trrd) 2T
x Row cycle time (Trc) 11T
x Row refresh cyc time (Trfc) 14T
x Read-to-Write time (Trwt) 4T
x Write Recovery Time (Twr) 3 bus clock
x Wirite-to-Read Delay (Twtr) 2 bus clock
x Refresh Rate (Tref) 200MHz, 7.8 us
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
MB Intelligent Tweaker(M.I.T.)
x Read Preamble value 5.5ns
x Async Latency value 7ns
CPU Spread Spectrum [Center Spread]
PCIE Clock [100Mhz]
Hammer Vid Control [StartUp]
Robust Graphics Booster [Auto]
DDR voltage control [Normal]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`