User's Manual

AudioJackCongurations:
Jack
Headphone/
2-channel
4-channel 5.1-channel 7.1-channel
LineIn/RearSpeakerOut
a a a
Line Out/Front Speaker Out
a a a a
Mic In/Center/Subwoofer
Speaker Out
a a
Front Panel Line Out/Side
Speaker Out
a
• TheintegratedHD(HighDenition)audioprovidesjackretaskingcapabilitythatallowsthe
user to change the function for each jack through the audio driver.
• To congure 7.1-channelaudio, you need to openthe audio software and selectDevice
advancedsettings>PlaybackDevicetochangethedefaultsettingrst.
(Note1) For3rdGenerationAMDRyzen
™
withRadeon
™
Graphics processors only.
(Note2) TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.
(Note3) Only for the A520M DS3H AC.
(Note4) ToenabletheQ-FlashPlusfunctionpleasevisitthe"UniqueFeatures"webpageofGIGABYTE'swebsite.
PleasevisitGIGABYTE'swebsitefordetailsonconguringtheaudiosoftware.
• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefrom
your device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
- 12 -