Owner's Manual

- 13 -
GH-PCU23-VE
English
Power Connection and Installation of the 3.5" Drive Bay Fan Speed Controller
Figure 1-1
Figure 1.
Connect one end of the provided power cable to the 3-pin header on
the cooler (Figure 1-2).
Figure 3.
Secure the 3.5" drive bay fan speed controller in a free drive bay with
the provided screws
(Figure 3-1). Connect the small 3-pin power cable
from the controller to the small 3-pin header on the cooler
(Figure 3-2).
Figure 4.
Start your computer after the installation is complete. If there is an item
that allows for CPU fan speed control in system BIOS Setup, disable the
function. Use the fan speed controller to adjust the fan speed based on
your requirements.
Figure 3-1
Figure 4
Figure 1-2
Figure 3-2
Figure 2
Figure 2.
Connect the other end to the motherboard 3-pin or 4-pin CPU fan
header (Figure 2).