Owner's Manual

- 11 -
GH-PCU23-VE
English
Installation Instructions for Intel
®
Pentium
®
4 mPGA478 Cooler & Clips
Figure 2.
Hook one end of the clip to one of the RM hooks
(Figure 2-1). Secure the
other end to the hook on the other side by pushing down on the handle
(Figure 2-2). Do the same for the other clip.
Figure 2-1
Figure 1.
Apply a thin layer of heat sink paste to the surface of the CPU
(Figure
1-1) and then place the cooler atop the CPU (Figure 1-2).
Figure 1-1
Figure 1-2
Figure 3-1
Figure 3.
Connect the 3-pin fan cable connector of the cooler to the motherboard
CPU fan header (Figure 3-1). Then the installation is now complete
(Figure 3-2).
Please refer to page 13 & 14 for power connection and installation of the fan speed controller.
Figure 2-2
Figure 3-2