Owner's Manual

- 10 -
GH-PCU23-VE
English
Figure 1.
Place the LGA775 RM onto the LGA775
motherboard so that side A is paralleled with the
ARM and side B is paralleled with the CAM.
Figure 2.
On the underside of the motherboard, secure a screw with a washer in one of the four holes
located adjecent to the processor socket. And do the same for the remaining three holes.
Figure 1
Figure 2
Figure 3-1 Figure 3-2 Figure 3-3
Figure 3.
Place the cooler on the CPU socket and secure it
with the P4 clips (Figure 3-1). Connect the 3-pin fan
cable connector of the cooler to the motherboard
CPU fan header
(Figure 3-2). Then the installation
is now complete
(Figure 3-3).
To install P4 clips, please refer to "Installation Instructions for Intel
®
Pentium
®
4 mPGA478 Cooler & Clips."
Side A
Side B
Installation Instructions for Intel
®
Pentium
®
4 LGA775 RM & Cooler
Plastic
Washers
ARM
CAM