Owner's Manual

ManualsBrandsGIGABYTE ManualsPC ComponentsGIGABYTE 3D Rocket II

y The cooler fan speed levels provided are for reference use only. Please refer to the motherboard BIOS to verify actual fan speed levels.

y Once the power supply cable is connected to the PCB of the cooler, please secure the partly transparent cover of the cooler prior to operation.

y Incorrect method of operation or use of product not for intended use

y Operational use beyond the advised standards (eg. overclocking)

y Inability to install the product as a result of incompatibility with the motherboard used

y Damage of product as a result of other product components

y Any form of alteration to original product

y A faulty product that leads to harm or damage to other products

y Damage caused by natural disasters (eg. earthquake, fire, flood)

y Products with a warranty sticker that is removed, torn or unreadable

y Due to the weight of the cooler exceeding normal standards, please remove the cooler before computer transport to prevent damage

to the cooler itself as well as prevent problems during installtion.

y BIOS

y PCB COVER

y ( )

Summary of content (25 pages)

PAGE 1
y The cooler fan speed levels provided are for reference use only. Please refer to the motherboard BIOS to verify actual fan speed levels. y Once the power supply cable is connected to the PCB of the cooler, please secure the partly transparent cover of the cooler prior to operation. y Incorrect method of operation or use of product not for intended use y Operational use beyond the advised standards (eg.
PAGE 2
PAGE 3
PAGE 4
PAGE 5
PAGE 6
Intel® Pentium® 4 LGA775 / mPGA478 AMD AM2 / K8 Installation Guide GH-PCU23-VE REV.
PAGE 7
Table of Contents Checklist ...................................................................................................................... 8 Specifications ................................................................................................................ 9 Features ...................................................................................................................... 9 Installation Instructions for Intel® Pentium® 4 LGA775 RM & Cooler .............................
PAGE 8
English Checklist (2) GH-PCU23-VE User's Manual (3) Heat Sink Paste (4) 3.5" Drive Bay Fan Speed Controller (1) GH-PCU23 -VE Cooler (5) PCI Bracket (7) LGA775 RM (8) P4 Clips (9) AM2 / K8 Clip (10) Screws (6) Power Cable Before use, please remove the protective film from the bottom of the cooler. Prior to installation, make sure that the computer is turned off and its power is disconnected.
PAGE 9
y Heat Sink Dimension : 112 x 112 x 175 mm y Life Expectancy : 50,000 hr y Compatible CPU : Intel® Pentium® Extreme Edition 955/840 Intel® Pentium® D Processor 960/840 Intel® PentiumR 4 Processor 670/570 Intel® Pentium® 4 478 3.4GHz AMD AM2 Series AMD AthlonTM FX62 AMD AthlonTM 64x2 5200+ AMD AthlonTM 64 4000+ y Fan Dimension : 92 x 92 x 25 mm y Heat Pipe Number : 4 y Base Material : Copper y Fin Material : Aluminum y Rated Voltage : 12V y Rated Current : 0.
PAGE 10
English Installation Instructions for Intel® Pentium® 4 LGA775 RM & Cooler Figure 1. Place the LGA775 RM onto the LGA775 motherboard so that side A is paralleled with the ARM and side B is paralleled with the CAM. ARM Side A Side B Plastic Washers CAM Figure 1 Figure 2. On the underside of the motherboard, secure a screw with a washer in one of the four holes located adjecent to the processor socket. And do the same for the remaining three holes. Figure 2 Figure 3-1 Figure 3-2 Figure 3.
PAGE 11
Figure 1. Apply a thin layer of heat sink paste to the surface of the CPU (Figure 1-1) and then place the cooler atop the CPU (Figure 1-2). Figure 1-1 Figure 1-2 Figure 2. Hook one end of the clip to one of the RM hooks (Figure 2-1). Secure the other end to the hook on the other side by pushing down on the handle (Figure 2-2). Do the same for the other clip. Figure 2-1 Figure 2-2 Figure 3. Connect the 3-pin fan cable connector of the cooler to the motherboard CPU fan header (Figure 3-1) .
PAGE 12
English Installation Instructions for AMD AM2 / K8 Cooler & Clip Figure 1-1 Figure 1-2 Figure 1. Apply a thin layer of heat sink paste to the surface of the CPU (Figure 1-1). Put the AM2/K8 clip on to the cooler as shown in Figure 1-2. Put the cooler onto the CPU (Figure 1-3). Figure 1-3 Figure 2. Figure 2-1 Figure 3-1 Figure 2-2 Figure 3-2 Align and secure one side of the clip (Figure 2-1).
PAGE 13
Figure 1. Connect one end of the provided power cable to the 3-pin header on the cooler (Figure 1-2). Figure 1-1 Figure 1-2 Figure 2. Connect the other end to the motherboard 3-pin or 4-pin CPU fan header (Figure 2). Figure 2 Figure 3. Secure the 3.5" drive bay fan speed controller in a free drive bay with the provided screws (Figure 3-1). Connect the small 3-pin power cable from the controller to the small 3-pin header on the cooler (Figure 3-2). Figure 3-1 Figure 4 Figure 3-2 Figure 4.
PAGE 14
English Power Connection and Installation of the PCI Slot Bracket Fan Speed Controller Figure 1. Remove the knob, bolt and controller from the 3.5" drive bay fan speed controller panel in sequence (Figure 1-1). Secure the controller, then the bolt and finally the knob to the PCI bracket (Figure 1-2). Figure 1-1 Figure 1-2 Figure 2. Place the PCI bracket with the fan speed controller in the selected PCI slot. Use screws to secure the PCI bracket in place.
PAGE 15
English Special Design y Fluorescent Ring y Dual Fan Duct Design y Changeable Fluorescent Rings (Colors: Blue / Green / White / Orange) y Dual Rocket Airflow Design Fan Duct For better performance and silent environment. To achieve the best cooling effect, place the sealed side toward the inside of the case. Sealed Side y Air Outlet Side y Air Outlet Side y y Sealed Side y Air Outlet Side Install the upper fan duct depending on the case you use.
PAGE 16
Intel® Pentium® 4 LGA775 / mPGA478 AMD AM2 / K8 GH-PCU23-VE REV.
PAGE 17
............................................................................................................... 18 ................................................................................................................ 19 ............................................................................................................... 19 Intel® Pentium® 4 LGA775 Intel Pentium 4 mPGA478 AMD AM2 / K8 ® ® ............................................ 20 ......................................... 21 .....
PAGE 18
(2) GH-PCU23-VE (7) LGA775 (3) (8) P4 (4) 3.
PAGE 19
y y y 112 x 112 x 175 mm Intel® Pentium® Extreme Edition 955/840 Intel® Pentium® D Processor 960/840 Intel® PentiumR 4 Processor 670/570 Intel® Pentium® 4 478 3.4GHz AMD AM2 Series AMD AthlonTM FX62 AMD AthlonTM 64x2 5200+ AMD AthlonTM 64 4000+ y y y y y y y 50,000 y y 92 x 92 x 25 mm 4 12V 0.38 1,500 ~ 3,000 RPM 16 ~ 33.5 dBA Ball Bearing y y y y y y Gamer ( 3.
PAGE 20
Intel® Pentium® 4 LGA775 1. LGA775 A B B LGA775 A LGA775 LGA775 1 2. 2 3.
PAGE 21
Intel® Pentium® 4 mPGA478 1. CPU CPU 1-1 ( ( 1-1) 1-2) 1-2 2. P4 CPU 2-1) 2-1 CPU P4 2-2 ( ( 2-2) CPU 3.
PAGE 22
AMD AM2 / K8 1. CPU ( CPU 1-1 1-2 ( ( 1-1) 1-2) 1-3) 1-3 2. AM2 / K8 ( 2-1 AM2 CPU 2-1) 2-2 K8 CPU ( CPU 2-2) 3.
PAGE 23
3.5 1. 3-pin ( 1-1 1-2) 1-2 2. 3-pin 4-pin CPU_FAN 2 3. 3.5 ( 3-1 3-pin 3-1) 3-pin ( 3-2) 3-2 4.
PAGE 24
PCI 1. 3.5 ( 1-1 PCI 1-1) ( 1-2) 1-2 2. PCI PCI 2 3. ( pin CPU_FAN 3-1 3-pin 3-pin 43-pin 3-1) 3-2 PCI 3-pin ( 4.
PAGE 25
y Gamer ( / y y / / ) y y y y y y - 25 - GH-PCU23-VE