3D MARS GZ-FA2CA-AJS/AJB English User’s Manual
English Thank you for purchasing Gigaby te Tech. thermal product. Gigabyte Tech. is dedicated to the integration of casing liquid/air-cooling solution technology to provide users with the most optimal solution for heat dissipation. For further information and specifications of “3D Mars” series, please visit Gigabyte Tech. website. (http://www.gigabyte.com.tw) The following are not covered by the warranty: 1.Using the product incorrectly or in a manner other than the designed purpose. 2.
1. Components Introduction 3 1-1 Casing’s Internal Structure 3 1-2 Front, Rear, and Left Side Panel Structure 3 1-3 Removal of Side and Front Panels 3 2. Features 4 3. Specifications 5 4.
English 1. Components Introduction 1-1 Casing’s Internal Structure 4 1 3 5 2 6 7 1 Power Supply Bay 4 5.25” Front Device Bay 2 PCI Tool-Free Fastener 3 Motherboard tray and PCI Slot panel 5 3.
English 6 3.5” Internal Device Bay 7 Foot Support 8. Accessory Box (Refer to the figures below for the attachments in the accessory box) a Copper Stand Off x 12 b c Power Extension Cable x 2 g f Motherboard Securing Screw x 12 Key x 2 h Power Supply Securing screw x 4 e d 3.5” Device Thumbscrews x 20 Wire Clamp x 2 i Dust Remover Cloth Magnet Ring 9.Cable Kit ( Refer to the figures below for the cable connectors) a USB 2.
English 1-2 Front, Rear, and Left Side Panel Structure A.Left Side Panel B.Front Panel 1 C.Rear Panel 1 1 2 2 3 2 4 A-1 Left Side Panel A-2 Latch A-3 Security Lock A-4 Ventilated Mesh / Transparent Side Panel B-1 Power / Reset Switches and LED light B-2 Front Multi-Media I/O port C-1 Dual Rear fans C-2 LCS Tube Outlets 1-3 Removal of Side and Front Panels 1-3.1 To remove side panels: 1-3.1a Remove the 4 thumb screws at the rear of the side panel, and detach the side panels. 1-3.
English 2. Features - All New Upgrade, Extremely Big Volume Extended Body, for easy installation and service, supports SLI, Cross Fire Dual/Quad multi-graphic G80 cards, and support 12” x 13” motherboard. - High Quality Design Gigabyte Tech. top-class full tower thermal solution casing. Lightweight aluminum alloy with hair-line brush anodized finishing. Fully-open aluminum side panel door design, with hair-line brush anodized finishing.
English 3.Specification Model GZ-FA2CA-AJS/AJB Case Type FULL TOWER Size 205 x 522 x 565mm (W x H x D) Front Bezel Material Aluminum Color Silver/Black Side Panel Ventilated Mesh / Transparent Body Material Aluminum (1.0mm) Net weight 8KG 5.25” drive bay (external) 5 3.5” drive bay (external) 1 3.
English 4. Installation Instruction Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recommended to set the chassis upright on the table. 〔Required Tools: Power supply securing screw x 4〕 1.1 Remove side panel (see step 1-3.1 on page 6). Place the power supply unit into the case. 1.2 1.3 Secure the power supply with the 4 securing screws.
English 4-3 Installation of Add-On Card This chassis supports tool-free installation of interface cards, e.g. graphics cards, sound cards, and etc. 〔Required Tools: None〕 3.1 Unlock the PCI slot retention lock. 3.2 3.3 Remove the internally attached dust proof PCI cover. Insert the interface card carefully into the expansion slot and lock the PCI slot retention lock.
English 4-4.2 Insert the IEEE 1394 connector into the corresponding socket on the motherboard. IEEE 1394 connector A Pin 1 2 3 4 5 Definition TPA+ TPAGND GND TPB+ IEEE 1394 connector B Pin 1 2 3 4 5 Definition TPA+ TPAGND GND TPB+ IEEE 1394 connector C Pin 1 2 3 4 5 6 7 8 Pin 6 7 8 9 10 Definition TPB- Pin 6 7 8 9 10 Definition TPB+12V +12V A +12V +12V GND B C GND Definition +12V +12V TPA+ TPAGND GND TPB+ TPB- Pin 9 10 11 12 13 14 15 16 Definition +12V +12V TPA1+ TPA1GND TPB1+ TPB1- 4-4.
English 4-5 Connection of Fan Power Cable This chassis has 1 x 12cm silent blue LED cooling fan at the front and 2 x 12cm silent blue LED fans at the rear. There are internal connectors that connects the front and rear fans making it into a single 3-pin power connector. 〔Required Tools: None〕 4-5.1 Insert the 3-pin connector into the system fan power connector on the motherboard. 4-6 Installation of 5.25” Front Device Bay Detach the front panel (see step 1-3.2 on page 6) and remove the front drive rail.
English In case the length of the power cable is not sufficient for installation of the bottom HDDs, please use the power extension cable which can be found inside the accessory box. Connect it according to the type of connector of your HDD. 4-9 Application of Removable/Dual Directional HDD Rack This chassis includes a removable/dual directional HDD rack for preferred installation direction and optimal heat dissipation. 〔Required Tools: None〕 9 .1 9.2 4-9.
English When moving or laying down the chassis, please swivel the foot support to the closed position, to prevent bending and damage 4-12 Application of Liquid Cooling System This chassis fully supports Gigabyte Tech. 3D Galaxy series liquid cooling system (also supports most of the liquid cooling systems currently available). While installing the liquid cooling system, please refer to its manual in advanced. 4-13 Recommended Gigabyte Tech. Thermal Solution Products.
