User`s manual

7-4 Cut a tube into suitable

size; connect one side of

the tube with the second

splitter on 4-way splitter

valve(1) and connect the

other side with the outlet

of chipset waterblock and

fasten the tube clips.

7-5 Cut a tube into suitable

size; connect one side

of the tube with the first

splitter on 4-way splitter

valve(2) and connect the

other side with the inlet of

chipset waterblock and

fasten the tube clips.

7-6 Before turning on the

power, please make sure

all tube clips are fastened

(as shown on Figure a,

Figure b and Figure c)

and switch on the 4-way

splitter valve.

7-7 To accomplish liquid cooling system, after turning on the power, appropriately pour

coolant into the tank.

Figure a Figure b

Figure c Figure d

While removing the tubes for disassembly, please make sure to switch off

4-way splitter valve, turn off the power and keep all the devices away from

any electronic part.

English