User`s manual

For GIGABYTE

™

3D Aurora

Triton or Poseidon series user, the tube can be

threaded through drainage inlet/outlet on the chassis.( as the two holes on the right

in Figure c )

Figure a Figure b Figure c

If the 2 splitters in the middle of 4-way splitter valve are

available, please do not take off the cap and switch them

to horizontal to avoid leakage.

4-6 Radiator to 4-way Splitter Valve Installation

4-6-1 Thread Tube 3 through the hole on PCI slot (as Figure a) to connect one side of

tube 3 to 4-way splitter valve (1) B and fasten the tube clips (as Figure b).

4-5-3 Connect one side of tube 2 to

4-way splitter valve (2) B as it

shows in the figure and fasten the

tube clip.

4-5-4 Connect the other side of tube

2 to the inlet of waterblock and

fasten the tube clip.

The 2 splitters in the middle of 4-way splitter valve can be used to support VGA,

chipset liquid cooling system or other liquid cooling system.

English