User's Manual

4.4 Installation

Please refer to the packing and installation sheet in the gift box to install TR320 on the wall.

4.5 Powering Up for the First Time

Once TR320 is powered up, it shows product name and company logo, and then acquires IP

address from network.

 Display Logo Screen

This product and Logo screen can be replaced by TR320 utility.

 Information Screen

Get IP successfully:

Fail to get IP address:

If it’s the first time to power up TR320, you have to set master card for administrator by following

the procedures below.

 Master Card Enrollment Screen

It’s required to set a least one master card by following the steps below.

1. Entry screen for Master Card setting:

2. After sweeping a RFID card:

3. Press key to set the second master card.