User's Manual

1
TM951296A
SmaFinger.Net Quick Start
Quick Start to connect the SF650A on the Ethernet
Step 1
Connect SF650A to Ethernet HUB
with (WAS-T0413) cable.
Note:
You can also connect SF650A to
your PC or Laptop directly with
same cable.
Step 2
Connect Power DC12V with
(WAS-T0132) Cable
Remark:
The WAS-T0132 can be used for
Power.
Or, you can connect the power to
the PIN VCC and GND (blue
connector of SF650A).
Step 3
Use “SmaFinger.NET Discoverer”
utility to search all
SmaFinger.NET device(s) on the
network.
(The utility can be found in the CD
disk5406).
Quick Start to connect the SF650A on the Ethernet
+
-
DC12V
+
-
DC12V