User Manual

1

TM951256A
Quick Start to connect the SF650 on the Ethernet
Quick Start to connect the SF650 on the Ethernet
Step 1
Connect SF650 to Ethernet HUB
with (WAS-T0413) cable.
Note:
You can also connect SF650 to
your PC or Laptop directly with
same cable.

Step 2
Connect Power DC12V with
(WAS-T0132) Cable
Remark:
The WAS-T0132 can be used for
Power.
Or, you can connect the power
to the PIN VCC and GND (blue
connector of SF650).

Step 3
Use “SmaFinger.NET Discoverer”
utility to search all
SmaFinger.NET device(s) on the
network.
(The utility can be found in the CD
disk5406).

OR
DC12V
‐
+
+
DC12V
‐
To
Hub
SmaFinger.NetQuickStart