Giga-Byte Notebook T1132XX, R1132XX (X=0-9, A-Z, a-z or blank) User Manual
Regulatory Notices CB : ● Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. ● Do not remove any batteries from the computer while it is powered on. ● Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.
Federal Communications Commission Notice : This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Battery Maintenance Guidance Before you use your Notebook on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Notebook is connected to external power using the power adapter. Fully charge the battery pack before using it for the first time. A new battery pack must completely charge before the Notebook is disconnected from external power. It takes a few hours to fully charge the battery when the Notebook is turned OFF.
Low Battery State : When the battery level is low, a notification message appears. If you do not respond to the low battery message, the battery continues to discharge until it is too low to operate. When this happens, your Notebook goes into Suspend mode. There is no guarantee your data will be saved once the Notebook reaches this point. CAUTION: To protect your Notebook from damage, use only the power adapter that came with it because each power adapter has its own power output rating.
The FCC RF safety requirement The radiated output power of the wireless LAN Mini PCI Card and Bluetooth card is far below the FCC radio frequency exposure limits. Nevertheless, the notebook PC series shall be used in such a manner that the potential for human contact during normal operation is minimized as follows: 1. Users are requested to follow the RF safety instructions on wireless option devices that are included in the user's manual of each RF option device.
Congratulations on your purchase of the GIGABYTE Notebook. 1 Check Supplied Items AC Adapter Battery Pack Manual Handy Bag (Optional) Power Cord Driver CD Global Warranty Card * The illustrations in this document may appear different from your model. 2 Using GIGABYTE Notebook for the First Time 1 2 1 2 Insert the battery pack into the compartment. Remember to slide the switch to the “Lock” position. English This Manual will help you to get started with setting up your notebook.
English 2 2 3 1 Connect the power cord to the AC adapter. Connect the AC adapter to the DC-in jack on the left side of the notebook. 3 Connect the power cord to the power outlet. 1 2 1 ! Lift up the rear panel to open your notebook and press the power button to turn on. Attention Your computer takes a few minutes for the first startup. No action is required until the setup window appears.
English 3 3 Your GIGABYTE Notebook Tour Top View 1 2 3 1 Web Camera 2 Microphone 3 LCD Display 4 Keyboard 5 Touchpad 6 Click Button 7 LED Indicators 7 8 Microphone Jack 9 Headphone Jack Num. Lock Indicator Caps Lock Indicator 3.5G Indicator Bluetooth Status LED 4 5 6 Wireless LAN Status LED 7 HDD Status LED Battery Status LED Power Status LED 8 9 Left View 1 DC-in Jack 2 Ethernet Port 3 Docking Port 4 External Display (VGA) Port 1 2 3 4 5 6 5 eSATA\USB 2.
English 4 Right View 1 Function Key 2 Multi Card Reader 3 USB Port 4 HDMI Port 5 Kensington Lock 1 2 3 4 3 To activate the Function Key a) During the off mode, press “Fn” button to enter “Smart Setup” menu. You can choose BIOS Setup Utility, System Recovery, and other functions in this setup menu. b) In the Windows operation system, press “Fn” button to initiate “Smart Manager”. Supports Secure Digital (SD), Multi Media Card (MMC), Memory Stick (MS), Memory Stick PRO (MS PRO) card.
5 Hotkeys Hotkey Fn+F1 Fn+F2 Fn+F3 Fn+F4 Fn+F5 Fn+F6 Fn+F7 Fn+F8 Fn+F9 Fn+F10 Fn+F11 Fn+F12 Function Description Sleep Puts the computer in Sleep mode. Wireless LAN Enables/disables the Wireless LAN function. Brightness Down Decrease the screen brightness. Brightness Up Increases the screen brightness. Display Toggle Switches display output between the display screen, external monitor (if connected) and both. Touchpad Toggle Turns the internal touchpad on and off.
English 6 4 GIGABYTE Software Application (The interface, icons and functions of the software listed below may vary based on the purchased models.) ● GIGABYTE Smart Manager You can activate GIGABYTE Smart Manager by double clicking on the shortcut icon on the desktop if the machine you purchased has the operation system builtin. GIGABYTE Smart Manager is an icon-based control interface, enabling users to intuitionally access common system setup as well as GIGABYTE exclusive utilities.
7 WARNING: Please refer to explanation as below to operate GIGABYTE Smart Recovery utility (under either 64-bit or 32-bit operating system). 1. Two options will appear when entering into Smart Recovery. 2. Both 64-bit and 32-bit systems will be restored back to factory defaults when pressing “Start” button. 3. You can choose to restore either the 64-bit or the 32-bit system back to its factory defaults in “Advanced Option” (select from the sub-menu after pressing “Advanced Option”). 4.
8 English Press”Continue to OS” button to enter operating system. Press”BIOS Setup Utility” button to enter BIOS setup utility. Press”System Recovery” button to enter GIGABYTE Xpress Recovery. Press”Shutdown” button to shutdown the system. 5 Specification & Appendix SKU Type T1132XX,R1132XX (X=0-9,A-Z,a-z or blank) CPU 2nd Generation Intel® Core™ Processor Operation System Microsoft® Windows® 7 Compliant Display 11.
