User's Manual

English
T1000 TouchNote USER’S MANUAL
23
LCD
Trouble Solution
The screen is
blank
Press hot key Fn + F5 to change the display
mode if certain external monitor is connected.
Make sure the system isn’t in the mode of
Hibernation or Standby.
WARNING: Please pay attention for below matters at
mounting design of touch panel of LCD module.
1.Do not put a heavy force along the edge of active area
2.Do not put a heavy shock or stress on the touch panel
and lm surface.
3.Do not put heavy goods on the touch panel.
4. The touch control LCD screen is the most fragile
component of the TouchNote and is prone to rupture
under external forces. Do not place any object on the
keyboard or between the keyboard and the screen to
prevent damage to the LCD screen.
5. When traveling with Gigabyte T1000 TouchNote, place
it in a special case in a tidy manner as far as possible.
Excess objects may squeeze the machine and therefore
damage the LCD screen.
6. Do not touch the screen with sharp objects or fingers
directly.
7. It is recommended that the LCD screen be wiped with a
special screen cleaning cloth. Wipe the screen gently to
avoid breakage of the screen.
8. Prevent any liquid from entering the LCD screen as this
may damage the elements of the LCD screen.
Audio
Trouble Solution
No sound emitted
Adjust sound controller.
Check the setting of sound volume of software.
Check if the ear phone is rmly connected.
Check the Devices Manager of Windows. Be
sure the Sound function has been activated
and isn’t interfered with other hardware.
Sleep / Hibernation
Trouble Solution
Can’t enter
into Standby/
Hibernation
Please check if the Windows Media Player is
running. If Yes, the T1000 TouchNote can’t
enter into Standby or Hibernation mode.
Please close Windows Media Player.