SB520 4K OTT BOX USER MANUAL
What’s in the box & how to set up your system system? SB520 HDMI Cable: Connect the HDMI cable to SB520 and to your TV LAN cable: If you use a wired network, connect the cable to the SB520 and to your router. If you use a wireless network, you will be able to set it up within the setting icon. IR cable: Connect the IR cable to SB520, then you could use IR remote controller.
*2 *8 Take to lock the vesa mount on your TV back And take to lock on the bottom side of SB520 Mount the SB520 on the back TV via VESA mount. Completing the set up 1. 2. 3. Turn on your TV make sure it’s tuned to the same HDMI input your SB520 is connected to You will either see a MBOX logo screen After BOX booting and you will be able to find out setting icon to: Set up your internet connection Adjust screen size to your TV Set up your language 4.
the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. FCC part 15.
