User's Manual

1-4. LED Indicating Light

This WLAN card conforms to the PC card Type II standard. There are six LED indicators,

front two indicate currently Tx/Rx status, the other four show the receive signal strength

from the linking Access Point.

The LED display window shows the current condition of the receiver signals. It specifies

the four conditions of “POOR”, “FAIR”, “GOOD”, and “EXCELLENT” receiver signals. It

also provides additional information if the station is “SCANING”, “Rx ” or in “Tx ” mode.

LED Continuously

Condition of the

Receiver

POOR FAIR GOOD EXCELLENT

LED Blinking

Condition of the

Receiver

SCANING Rx Tx

1-5. System Requirements

1-5-1. Supported Platform:

IBM PC/AT compatible computer

1-5-2. Supported Operation System:

Windows 98SE/Me/2000/XP