User's Manual

9
mode. The modes displayed have two values: “Ad Hoc” and “Access Point”.
Figure 3-8. Configuration
Ad Hoc channel: When the card’s network mode is set to Ad Hoc, you can select a
channel from the AD Hoc channel drop-down menu for your Ad Hoc group to use.
SSID: This is the wireless network name expressed as text string that all members within
the same network share. Devices that don’t share the same network name cannot
communicate with each other. If configured to “any” (the default setting), your card can
communicate with any available access point (If the access point isn’t closed system).
3-3-2. Advance setting:
Click “Modify” button(see Figure 3-9)
Figure 3-9
Click “Advance” button to enter the advance configuration screen (see Figure 3-10).