User Manual

One indicates R/W status. One indicates Link status and the others indicate the intensity of

received signals.

R/W:

This LED is blinks quickly when the card is flash memory Read or Write.

＊

＊＊

＊To prevent data loss and/or damage to WLAN Card, never remove WLAN Card from the

USB port while data is transferring.

Link:

Blinking Slow The card is scanning the network.

Continuously On The card is successfully connected to a network.

Blinking Quickly The data is being transmitted/received

LED Light

Condition R/W Link

Intensity of received signals:

This LED specifies the four conditions of “POOR”,

“FAIR”, “GOOD”, and “EXCELLENT” .

LED Light

Condition of the

Receiver

POOR FAIR GOOD EXCELLENT

1-5. System Requirements

1-5-1. Supported Platform:

IBM PC/AT compatible computer

1-5-2. Supported Operation System:

Windows 98SE/Me/2000/XP

1-5-3. Software Access Point Supported Operation System:

Windows 2000/XP

1-6. Write-Propect Function

When the Write-Protect switch is set to Unlocked “ ”, you can read/write data