User's Manual Part 1

ManualsBrandsGIGA-BYTE TECHNOLOGY ManualsComputers & Accessories11Mbps USB Wireless LAN Adapter

GN-WLBM101

IEEE 802.11b Wireless USB Network Adapter

User’s Manual

http://www.gigabyte.com.tw

Rev. 1.0 First Edition

Summary of content (5 pages)

PAGE 1
GN-WLBM101 IEEE 802.11b Wireless USB Network Adapter User’s Manual http://www.gigabyte.com.tw Rev. 1.
PAGE 2
Contents CHAPTER 1. PRODUCT OVERVIEW ..........................................................................................1 1-1. INTRODUCTION TO THE WIRELESS LAN ADAPTER..........................................................1 1-2. FEATURES .................................................................................................................1 1-3. PHYSICAL DIMENSIONS/PACKAGING .............................................................................1 1-4. LED INDICATING LIGHT .........
PAGE 3
Chapter 1. Product Overview 1-1. Introduction to The Wireless LAN Adapter This wireless LAN (Local Area Network) adapter is composed of the IEEE 802.11b MAC, Baseband, and radio components, USB interface, and two built-in antennas. This product adopts the direct sequence spread spectrum (DSSS) technology and the DBPSK, DQPSK, and CCK modulation mode to provide a very stable wireless communication quality and an excellent signal receiver capability.
PAGE 4
1-4. LED Indicating Light Power: The Power LED lights up when the USB wireless LAN adapter is powered on. Link: The Link LED lights up when the adapter has an active connection. If the LED isn’t on, the adapter isn’t interfacing with the network. 1-5. System Requirements 1-5-1. Supported Platform IBM PC/AT compatible computer 1-5-2.
PAGE 5
Chapter 2. Installing the Wireless LAN Adapter 2-1. Installing The Driver & Utility (Applicable to any supported OS) Step 1: Please make sure that you don’t plug your USB adapter yet. Step 2: Insert our setup CD into your CDROM drive, the following window will pop up. Step 3: Click “Install Wireless LAN Driver”. Step 4: Click “Next”.