User Manual

Chapter 3. Mounting the IBM Anyplace Kiosk to the wall

Follow these procedures to mount the IBM 4836/4838 to the wall.

Mounting the wall mount plate

The mounting adapter A is secured to a metal wall-mount plate B, which can be

installed on wood, drywall surface over studs, or a solid concrete or brick wall.

Wall mounting requirements

Note: Before mounting the wall mount plate, ensure that you are following all

applicable building and electric codes.

When mounting, ensure that you have enough room for adequate viewing,

ventilation, and access to an AC power outlet. The method of mounting must be

able to support the combined weight of the IBM 4836/4838 plus the suspended

weight of all the cables to be attached to the system. Use the following methods for

mounting your system:

Figure 12. System and wall mount plate

Updated August, 2006