User Manual

Installing the upgrade options
Note: Most internal upgrade options are ordered and arrive pre-installed. This
section is provided for technical personnel only.
Installing a hard drive
See Figure 2 on page 8 to identify the hard drive access door.
1. Place the IBM 4836/4838 face down on a sturdy surface.
2. Unfasten the two captured screws to remove the HDD door (A). See Figure 8.
3. Locate the slot and brackets and insert the hard drive (B).
Note:
Note the optional wireless card (C). If ordered, this card is installed at the
factory. For removal and replacement procedures, see“Removing the
wireless card” on page 33.
Figure 8. Removing the hard drive cover
Updated August, 2006
16 Anyplace Kiosk 4836/4838