User Manual
opening. Slide the MSR downward into position, being careful not to pinch the
MSR cable. The ground strap should be on top of the main shield flange. See
1 in Figure 6.
4. Plug the USB cable into the connector. See 2 in Figure 6.
5. Install the hard drive door with MSR latching tab and secure the two screws.
See 3 in Figure 6.
1
2
3
Figure 6. Installing the MSR (12 inch models)
Updated August, 2006
Chapter 2. Installing the IBM Anyplace Kiosk 13
|
|
|
|
|
|
|
|
|
|
|