User Manual

Installation steps
Follow these steps to install the IBM 4836/4838:
1. Install your options (except the MSR).
2. Route, connect and retain the cables. See “Retaining the cables” on page 11.
Be sure to route the cables through the mounting stand before connecting to the
unit.
3. Install the IBM 4836/4838 on your mounting option: table-top (see “Table-top
mount” on page 18) or wall (see “Wall mount” on page 19 or the third-party
mount instructions).
4. Install the optional MSR.
5. Power On the IBM 4836/4838. See “Powering on” on page 19.
Opening the cable covers
The cable covers provide security and protection to the IBM 4836/4838 cable and
connections.
Note:
You can use a screwdriver, if required, during these steps. The USB cover
can be opened independently of the cable cover.
1. Unscrew the USB cover thumbscrew.
2. Unscrew the cable cover thumbscrew.
3. Open both cable covers.
Updated August, 2006
10 Anyplace Kiosk 4836/4838