User Manual

About this guide

This guide provides information on installing and servicing the IBM

Anyplace Kiosk

and is organized as follows:

v Chapter 1, “Introducing the IBM Anyplace Kiosk,” describes the features and

available options for the 4836/4838.

v Chapter 2, “Installing the IBM Anyplace Kiosk,” provides the installation steps for

the 4836/4838.

v Chapter 3, “Mounting the IBM Anyplace Kiosk to the wall,” describes the

procedures for mounting the 4836/4838 to the wall.

v Chapter 4, “Removing and replacing FRUs,” provides removal and replacement

procedures for the field-replaceable parts.

v Chapter 5, “Troubleshooting problems,” describes steps for diagnosing minor

problems.

v Appendix A, “Field-replaceable units,” describes the available FRU part numbers.

v Appendix B, “Product dimensions,” provides precise product size information for

all models.

v Appendix C, “Notices,” provides legal, emission, and country-specific information.

v Appendix D, “Safety information,” provides safety information for all common

languages.

Throughout this guide, the terms 4836/4838 and IBM 4836/4838 refer to the IBM

Anyplace Kiosk.

Who should read this guide

Personnel responsible for installing, maintaining, and using the IBM Anyplace Kiosk

should read this guide. Some chapters provide information that is intended for

trained, technical personnel.

Related publications

The following IBM publications, drivers, and service diskette information are

available from the IBM Retail Store Solutions Web site at: http://www.ibm.com/

solutions/retail/store/support/.

v IBM Safety Information – Read This First, GA27-4004

v IBM Anyplace Kiosk System Reference, available only on the web site.

Updated August, 2006