User Manual

Replacing the front bezel
1. Remove the cover as described in “Removing the back cover” on page 31.
2. Disconnect the touch cable (A) and control card cable (B).
3. Remove the control card C.
4. Disconnect the speakers (D) and lift to remove
5. Remove the eight screws (E) that hold the LCD assembly (includes the
system board) to the front bezel.
6. Lift out the LCD assembly from the front bezel, being careful not to bend the
antenna.
7. To replace the front bezel, reverse this procedure.
A
B
D
E
C
Figure 30. Replacing the front bezel
Updated August, 2006
46 Anyplace Kiosk 4836/4838