User's Manual Part 1

GN-MD01 AirCruiser G Game Adapter

Hardware Installation

Follow the steps below when installing your Game Adapter(s).

Before you begin, please keep the following in mind when placing your Game Adapter(s).

9 Select a suitable location to install the Game Adapter. Assure that the location is away from

any interfering radio signals from devices such as microwave ovens, garage door openers,

vacuum cleaning devices, etc. Please also operate the Game Adapter in a cool dry place,

away from direct sunlight.

9 Position the Game Adapter appropriately. Signal strength is greatly dependent on your well

placed Game Adapter. Generally, a centralized area with 360° clear line of sight is the best

location with the antenna in a high position to allow optimal propagation of the signal. The

location of the Game Adapter greatly influences the signal reception.

Access Point Mode

Step 1 Turn off all the hardware devices in your network.

Step 2 Connect the Ethernet cable of your router/hub to the LAN port of the Game Adapter.

Step 3 Plug the power adapter cord into the router’s power jack and then plug the power adapter into a

power outlet.

Step 4 Turn on all the hardware devices in your network. After verifying all the connections, proceed to

Appendix C: PC Configuration