User Manual

GN-BT06T Bluetooth Media Adapter
6
Receiver Mode
Figure 6: Receiver Mode Diagram
Step 1 Plug the power adapter cord into the adapter’ s power jack and then
plug the power adapter into a power outlet.
Step 2 Connect the Line Output from the GN-BT06T to the speaker or other
Stereo Audio system.
Step 3 Switch on the power. And set the GN-BT06T in Receiver mode. Now,
the power led will be orange light.
Step 4 Connect the Bluetooth USB Dongle to your PC.
Step 5 Then, please open the Bluetooth Configuration screen. (Please refer
to your Bluetooth USB Dongle user’ s guide for installing instruction.
Below Configuration Screen comes from IVT, you may have different
Bluetooth Dongle Configuration Screen in your Bluetooth Dongle
Package)