User's Manual

38
3-4 Wireless Basic Setting
Step 1. Please key in the data.
Region
Because of the different region has different open channel regulations, please choose your local
area, system will change to your local area utilize channel list automatically.
Channel
Please choose the Channel where you at, different area has different channel range, the default
value is channel 6.
SSID
The default value is “gigabyte”, if the setup value is the default value, like “router”, Only can
accept the computer connection, which use the Wireless card ESSID (or SSID) set up, is “router”.
(Note: The maximum length of SSID is 32bit letter of English or numeral and remember
what you type, its case sinstive.)
Rate
There are four chooses for the Maximum transition rates, 11Mbps/5.5Mbps/2Mbps/1Mbps.
WEP Setup
Five chooses as following:
1. Not use.
2. Using 64-bit WEP encryption, and using pass phase change to the key. For the wireless card
portion, please setup the first set password value.
3. Using 64-bit WEP encryption, enter to the key manually, and be able to choose what group
of key as well.
4. Using 128-bit WEP encryption, and using pass phase change to the key. For the wireless card
portion, please fill up the password on the first set password area.
5. Using 128-bit WEP encryption, enter to the key manually.