User's Manual

Step 6. Choose your desired wide area network mode

PPPoE: If you are using the hourly rate for the ADSL, please select this item.

Note –PPPoE Please jump to Step 6

Dynamic IP Address: If you use the wideband fixed connection of ADSL/Cable

Modem, but do not have a static IP, please select this item.

Note –Dynamic IP Please jump to Step 10

Static IP Address: If you use the wideband fixed connection of ADSL/Cable Modem,

but have a static IP, please select this item. .

Note –- Static IP Please jump to Step 14

Modem: If you use the wideband fixed connection of PPP(Modem) , please select this

item .

Note –- PPP(Modem) Please jump to Step 18

After your desired wide area network mode is selected, please press “Next”.