User's Manual

GN-BR32V-RH 2.4GHz AirCruiser Ultra N Wireless Router
3
LEDs
Figure 3: LED Layout
The table below describes the LED indicators on the front
panel of the GN-BR32V-RH. All LEDs are green when lit.
LED STATUS Color DESCRIPTION
On Green Power is supplied to the Router
Power
Off N/A Power is NOT supplied to the Router
Flashing Green Data is being transmitted wirelessly
On Green No traffic
WLAN
Off N/A WLAN status idle
On Green WAN port has detected a wired link with a
DSL or Cable modem.
WAN
Flashing Green Data is being transmitted / received
through WAN port.
WPS Flashing Red WPS function is active.
Note: if you hold the button over 4
seconds, the router will inactive WPS
function.
On Green LAN port has detected a link with a
10/100Mbps device
LAN
Flashing Green Data is being transmitted / received
through LAN port.
When WLAN LED and WPS LED are flashing at the same time, the both
leds display might look like orange color from a distance.
Please be careful about the led color when troubleshooting.
Key Features
¾ Web based Firmware upgrade
¾ MDI/MDIX Auto crossover detect
Power LED
LAN LED (4)
WAN LED
WLAN/WPS LED