User's Manual

GN-BR02G 2.4GHz Wireless Broadband Router
3
LEDs
Figure 2: LED Layout
The table below describes the LED indicators on the front
panel of the GN-BR02G. All LEDs are green when lit.
LED STATUS DESCRIPTION
Green Power is supplied to the Router
Power
Off Power is NOT supplied to the Router
WLAN Flashing Data is being transmitted wirelessly
On WAN port has detected a wired link with a
DSL or Cable modem.
WAN
Flashing Data is being transmitted / received
through WAN port.
On LAN port has detected a link with a
10/100Mbps device
LAN
Flashing Data is being transmitted / received
through LAN port.
Key Features
¾ Conforms to IEEE 802.11g specification.
¾ Wireless transmits data rate up to the maximum speed of 108Mbps*.
¾ Supports 64-bit /128-bit/152-bit WEP encryption, 802.1x, and WPA™.
Power LED
WLAN LED
LAN LED (4)
WAN LED